Login / Register

Use of 3M750

3M493-41
Universal Clampers (set of 4)
to be used to clamp on the tyre on mag wheels with rounded edges where clamping on the rim is not possible.

To be used in combination with Self centering Clampers 3M631.4
(supplied separately).

To be used only with Contact Clamp 3M750-4 or 3M683-4

Use of 3M762

3M528
Toe-check-stand for AUDI
required to adjust TOE CURVE on AUDI cars.

Use 3M561

3M152
Rear slipping tables mm 300x300x22.
Max weight = 600Kg
to be used when alignment is made on a pit or when the lifter has no built-in rear slipping tables.

3M415
Rear slipping tables mm 1250x360x40
Max weight = 600Kg
to be used when alignment is made on a pit or when the lifter has no built-in rear slipping tables

3M2995
Extensions for Universal Clampers (set of 12)
For rim with overhanging spoke (like Ford Mondeo, Renault Modus)

To be used in combination with Universal Clampers 3M493-41 (supplied separately)

Mounting 3M2995

3M2204
21" extensions for Cars Clampers (set of 12)
Extend capacity of old clampers to handle up to 21" rims.

3M2182-4
Quick Clutch for Clampers (set of 12)

3M421-4
Special Clampers for Mercedes ( set of 4)
Attach directly to the holes provided on the wheel's rim to avoid run-out compensation.

To be used in combination with Universal Clampers 3M493-4 (supplied separately)

3M663-4

Special Clampers for Mercedes ( set of 4)
Attach directly to the holes provided on the wheel's rim to avoid run-out compensation.

To be used in combination with Universal Clampers 3M493-41 (supplied separately)

To be used in combination with 3M421-4 or 3M663-4  (supplied separately)

To be used in combination with 3M421-4 or 3M663-4  (supplied separately) 

3M623-4
Special Clampers for Porsche ( set of 4)

To be used in combination with Universal Clampers 3M493-41 (supplied separately)

3M382
Clamper's reel holder

Mounting 3M669

V517
Fasep Box EOBD for steering diagnosis
Zero Setting steering gearbox

Catalogue

User's manual

(set of 2 pcs)

including:
2x Electronic truck turntables 3M075-1
4x Truck clampers 3M212

not including: 3M114 (required for twin-wheels)

compatible with: any aligner model
recommended for: adding truck alignment capability to existing wheel alignment system.

including:
2x Electronic truck turntables 3M075-1
2x Truck clampers 3M212
2x Avant sensors 3M465

compatible with: any aligner equipped with Classic1/Classic2 sensors.
recommended for: performing easy and fast single-axis wheel alignment check on trucks

including:
2x Electronic truck turntables 3M075-1
4x Truck clampers 3M212
2x Avant2 sensors 3M465-2

compatible with: any aligner equipped with Classic1/Classic2 sensors.
recommended for: performing easy and fast multi-axis wheel alignment check on trucks

CPS KIT = Truck - Standard turntables

including:
2x Truck turntables 3M036
4x Truck clampers 3M212

not including: 3M114 (required for twin-wheels)

compatible with: any aligner model
recommended for: lowest cost to add truck alignment capability to existing wheel alignment system.

CPS AVANT KIT
(Truck - Standard turntables + Avant sensors)

including:
2x Truck turntables 3M036
2x Truck clampers 3M212
2x Avant sensors 3M465

compatible with: any aligner equipped with Classic1/Classic2 sensors.
recommended for: performing easy and fast single-axis wheel alignment check on trucks

CPS AVANT2 KIT
(Truck - Standard turntables + Avant2 sensors)

including:
2x Truck turntables 3M036
4x Truck clampers 3M212
2x Avant2 sensors 3M465-2

compatible with: any aligner equipped with Classic1/Classic2 sensors.
recommended for: performing easy and fast multi-axis wheel alignment check on trucks

(see also Truck Accessories in kit)

Dimensions

Dimensions

Dimensions

Use of 3M774

3M465
AVANT sensors for Trucks (set of 2)
max wheel diameter 1200m

AVANT sensors can be used as a stand-alone solution.
They can measure one only axle at once.
AVANT sensors provide an effective advantage in reducing time required for aligning trucks.

3M465-2
AVANT2 sensors for Trucks (set of 2)
max wheel diameter 1200m

These sensors are to be used in combination with units equipped with Classic2 sensors. AVANT2 sensors provide an easy solution for measuring wheel alignment on multiple axles on trucks.

3M614-1
Clamper for sensor for Trucks
enables use of AVANT/AVANT2 sensors on wheels with diameter max 1350mm

Mounting 3M614-1

3M560
Truck alignment bar
for use on trailers

3M114
Twin-wheels compass
for measuring twin-wheels width

(only for PC-based wheel aligners)

3M326
Rear slipping tables for truck mm 1750x400x40
to be used when alignment is made on a pit or when the lifter has no built-in rear slipping tables
Max weight kg. 3500