|
For a quality wheel balancing, accuracy in placing
weights is a must.
FASEP video wheel balancers can be equipped with LASER system for accurate
application of adhesive weights inside the rim.
With the LASER system, user get a lot of advantages:
1. identify, from the start, that is during input of rim dimensions, the point
of application of weights to avoid areas of the rim that are not flat.
2. after measuring spin, find easily the point of application in a very visible
zone in the lower part of the rim.
3. clean point of application easily as you see very well the exact point
the weight must be placed.
4. apply the adhesive weight, very accurately, with no chance of mistake even by
a few millimeters as the LASER is just a dot. Unlike traditional ALU-S system
working at 12 o' clock in a place the user cannot see.
|
