FASEP - What they say about us

19 February 2010

The wheel alignment technology is totally different to anything else operating, offering a more sophisticated procedure using radio signals to carry out an accurate and fast alignment, complete with printouts before and after. Making no contact with the wheel rim, it takes just 30 seconds to set up and analyse each tyre, so within twenty minutes your wheel alignment check is done.

Hopinit Tyre & Auto Care Centre - Australia

26 September 2009

My equipment and FASEP 2000 and I'm proud he is really the point they walk very well and I remain faithful to FASEP 2000.

Equillibrage et parallélisme des roues suspension freinage pneumatique climatisation, El Taref - Algeria

09 September 2009

203.224 spins on the B441

Bob Jane Tmart - Australia

17 July 2009

324.207 spins on the Videotronic Omega

Pecchioli Gomme - Italy

30 June 2009

Wheel Balancers of yours, show the greater design depth to under stand and highly impressive.

B.Karthikeyan, ATS ELGI Ltd - India

15 June 2009

Customer: Roadstar Tyres in Hoppers Crossing, Victoria, Australia.

They are very happy with the Fasep Aligner. The customer previously had a Hunter Aligner.

DAVID PESAVENTO - Australia

28 May 2009

If I sold wheel balances it would be your vertical mount, fantastic machine.

RMS - Australia

26 May 2009

It is my pleasure to contact you and tell you my compliments about your stand at Autopromotec fair.
I was really surprised and satisfied the range of wheel balancers and tire changers, it is very big, you have too many different models, almost for all kind of customers.

Gaga Abuladze - Georgia

7 April 2009

Letter of testimony Geelong

12 December 2008

I must say I am very impressed with your support centre and knowledge base. It is very very helpful and a very informative part of your site.

Sally - Tyrebay Direct

3 December 2008

Letter of testimony Mark Vettori

9 October 2008

So Proude to have that great moments on your web site ..it's amazing

Ashraf - Nour Trade and Supplies

17 April 2008

We are selling from year 1994 Hofmann brand. Till today. Oldest Hofmann dealer in Baltic Countries. But your machines working well, no problems till today. Maybe you can send me your new pricelist?

Peeter Luik

12 mar 2008

211.000 spines de la Omega! (*)

Mauro Ruggeri - Argentina

(*: 211.000 spins on the Videotronic Omega)

10 December 2007

Congratulations for these improvements (over the products). I am very pleased you have listened to my concerns and your ability to react is most impressive.

Tim Green - Greentech - Australia

1 august 2007

We bought your products from one local firm and we are very satisfied-the experience that we made during several years proved the high quality of your equipment, so that we can rely on them without any doubt. So we are very thankful for such a good service equipment.

Tamaz Khazalashvili - Tblisi - Georgia

11 May 2007

Thank you so so much for your help, everything is great now, we are appreciate all the employees in your company who was trying to help us, thanks a lot.

Paata Zhgenti - TEGETA MOTORS Ltd - Georgia

10 May 2007

Your support looked very good in my customers eyes as I was able to meet with him first thing this morning with a reply.

Tim Green - Greentech - Australia

9 May 2007

CONGRATULATION IT IS REAL AND TRUE IT IS MADE IN ITALY
It was a very nice moments I feel it talking to a very wonderful Master on his Business powerful in ATOMIC,XPs Engineering.
Now I am so much proud of Fasep Company to the Team of Engineers and Staff up to the Head of this company for the best quality been achieved building up .
ATOMIC,XP FOR THE COMING FUTURE AND FOR FULL OF WORLD CUSTOMER'S SATISFACTION

Essam El Jack - Al Esay - Service dept - KSA

15 April 2007

I am very satisfied with your products and I'm interested about your new products Videologic Concept.
I would like to accentuate that I'm satisfied with the concept of work of your products. I tried to work with (Beissbarth, Nussbaum, Corghi) but I found Fasep the easiest to work with, especially "Caster" and "Tach-VAG".

Ratko - Optik Autoservice - Pula

13 Mar 2007

Motorcycle Wheel Balancer is proving to be very good on the UK market. Hopefully this will now continue to grow for the future and our business relationship will become a long standing success.

Robin Milton - UK

7 Mar 2007

I have seen FASEP ALIGNERS here, they are robust , sleek and accurate.

Ajit Singh - New Dehli (India)

29 January 2007

Please tell me the name of your distributor in Spain to buy a new FASEP wheel balancer as we had very good results with the current one.

Jose Luis Peña - Aranda De Duero (Burgos)

11 December 2006

I think it is an insult to compare Fasep Winlogic to Space. Fasep is far superior.

Rob Lovesy - Supertracker - Uk

3 oct 2006

The customer was a Corghi fan, until he saw the difference between Fasep and Corghi.

Alex Bertchi - Suisse

19 july 2006

FASEP great product

Bayu - Megatek - Indonesia

22 may 2006

The test on your wheel balancers is going well. The customer likes the features and my technician and I are impressed with the build quality.

Tim Green - Australia

4 nov 2005

Nous aimerions vous dire que FASEP est une marque très connue en Côte d'Ivoire.

Roger Monaco - Yamoussoukro - Cote d'Ivoire

27 oct 2005

just a quick note to let you know we received delivery of the Motorcycle Balancer last week.
Upon opening the box and assembling the machine today, we are very impressed, it looks extremely high quality and very robust.

Robin Milton - UK

1 march 2005

..actually Stamford Tires people prefers FASEP equipment than others. Because of your products performance, durability and immediate technical support.

U Kyi Hla, Singapore

7 oct 2004
Hi my name is Ahmad from Saudi Arabia in Jeddah , I have bought the latest wheel alignment system of yours from your agent in K.S.A and I would like to thank you and tell you that it is absolutely an easy and perfect one. It was the right choice I had made when I've bought your alignment system .

Ahmad - Saudi Arabia

22 sep 04
good day to you! I have a lot of customer using your brand and I am the one doing the service contract. I am very interested to supply your product because it is good and easy in maintenance.
thank you very much and more power to FASEP.

Victory Sanchez - Philippines

1 sep 04
...I must say again--I can always rely on support from FASEP. I have NEVER received this kind of support from any American manufacturer!!

Ed Dinkler
New Jersey - USA

7 jun 2003
...the problem we had has been rectified. Apparently one of the connections was loose. We appreciate your help and will contact you if we come across any other problems.
If you are ever in Melbourne, Australia we would like to invite you to our place of business.

Matt Gulmen - Australia